Burda wrap dress

This is my first Burda dress (11/2012 #116) this year using Spotlight fabric and lined with tricot. This pattern doesn’t need lining and doesn’t come with lining pieces. I added the lining so there are no ‘visible lines’ or ‘clinging skirt’ syndrome.
Burda patterns provide just the pattern with no seam allowance. In the past this was a stumbling block for me. Lately I’ve been enjoying sewing patterns with 6mm seams so I’ve used my little magnet thingy to add the seams at the ‘tracing off the pattern onto paper’ stage. I then use the little magnet thingy again for cutting out those tricky fabric bits with the pattern.
Magnet thingy
While the fabric has a subtle all-over print, there is a repeat in it. Love a good repeat challenge. It adds that extra hurdle to get my sewing projects to look more spesh.
Here’s the final dress
If you sew Burda patterns then you would know the aspects I’m about to mention below. These notes are mostly for me to use as a reference for making future BurdaStyle patterns.
Burda sizing
This is a petite pattern. I chose size 20 for the bust and hips and 18 for the waist. When I checked the bodice during the project it was too big so I sewed 18 at the bust. If I’d checked the actual body ease on the pattern pieces, I’ve probably taken out the built-in pattern ease.

Checking for bodice fit

Burda notches

Even with my dodgy tracing skills, the notches were spot on.
Back view

Petite

The Burda sizing /proportions for a petite like me were also spot on. There are two petite modifications I’ve made.

Pocket petite: I made was to cut the pocket bag to a smaller depth. I don’t adjust the pocket opening, just the depth of the pocket.
A shorter pocket

To keep the pockets from bagging, I’ve used seams great a tricot trim on the pocket seams. The pockets are sewn into the skirt side seams. 


What is clever is the top of the pocket piece is also sewn into the waist seam, so the pocket doesn’t flip backwards.

Sleeve petite: I’ve shortened the sleeve at the elbow so that the wrist width is at my natural width. If I’d lopped it off at the hem, the wrist width would have bagged out. 

Adjustments
Roll shoulder adjustment across the whole shoulder and on the sleeve head.
Sway back adjustment on the back bodice and the back skirt pieces. That’s why my version has a centre back seam – to add the shaping I need.
Back bodice view
Lining
This pattern isn’t lined but I prefer lining. So the easiest way to make the lining pattern was to trace off the bodice pieces again minus the facings. That’s the beauty of having a pattern with no seam allowances.
The skirt has the facing built into the skirt front so I had to sew the lining in a few stages, in between three coffees and a good night’s rest.
Aligning and hand stitching the hem with the lining on the floor.
Hem
My fabric was too wriggly for a mitre corner. I’ve hand sewn the hem onto the lining. I’ll try this again on the next version. If the next version is also very fine, I might interface the corner so it’s easier to mitre.
Cutting out the collar pieces
Detailing
The sleeves have two versions – one with a cuff and one without the cuff. There’s a belt and belt loops. The closure used are two snaps. I’ve used three – one clear snap at the bust because this is a work dress. If this wasn’t a work dress, I wouldn’t add that third safety snap.
Matching the print on the sleeve pieces

What didn’t work

I tried to add piping on the collar and the fabric was way too thin to handle the extra weight without adding additional layers of fabric. Piping is not part of this pattern. It was a feature I wanted to add. Oh well…
Ready for work
Wrap top or wrap skirt
On the pdf, there are some lines on the front bodice indicating it could be for #115 of the same issue. I don’t have Burda 11/2012 so I can’t confirm this.
So I’m guessing it’s for a wrap top pattern. The back pattern pieces can be modified if I decide to remake this as a wrap top. That’s what I’m thinking.
Which also means I could easily use this pattern for the wrap dress, a wrap skirt and a wrap top too.

I have another four BurdaStyle patterns to make and you’ll see these over the coming months: 
Cigarette pants 02/2014 #129
Split neck dress 09/2014 #101
Structured peplum top 02/2014 #115
Asymmetric jersey dress 05/2014 #115

29 comments

  1. It's beautiful – and unlike a lot of wrap dresses it sits quite high at the crossover point – most are far too low, and who wants to wear a cami under a smart dress like this?

    Like

  2. Maria…this is another make that I want in my own closet. I am working on a knit wrap dress but after seeing this beauty think I should just bin it. Beautiful!

    Like

  3. This is lovely Maria. I really want to make a wrap dress now. Your fabric choice once again is fantastic. I'm going to check out the other Burdastyle patterns you've picked now!

    Like

  4. Why hello DvF style RADNESS! This is so elegant on you, Maria! And I second team cigarette pants. They are going to be fierce!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.